3
Proper Installation
This water filtering system must be properly installed and located in accordance with the
Installation Instructions before it is used or the warranty will be void.
•
Do not
install or store where it will be ex-
posed to temperatures below freezing or
exposed to any type of weather. Water
freezing in the system will break it. Do not
attempt to treat water over 100°F.
•
Do not
install in direct sunlight. Excessive
sun or heat may cause distortion or other
damage to non
-
metallic parts.
•
Properly ground to conform with all govern-
ing codes and ordinances.
•
Use only
lead
-
free solder and flux
for all
sweat
-
solder connections, as required by
state and federal codes.
•
Maximum allowable inlet water pressure is
125 psi. If daytime pressure is over 80 psi,
night time pressure may exceed the maxi-
mum. Use a pressure reducing valve to re-
duce the pressure.
•
WARNING:
Discard all unused parts and
packaging material after installation. Small
parts remaining after the installation could
be a choke hazard.
The Matrixx inFusion system provides iron and sulfur removal throughout the home. The
Matrixx inFusion system should be installed at the point of entry to treat the entire home, both
hot and cold water.
The Matrixx inFusion system
’
s backwashing tank removes iron and sulfur using oxidation.
When water is used in the home, hydrogen peroxide is injected in the Matrixx inFusion feed to
create super oxidation during operation. The Catalytic Carbon media in the Matrixx inFusion
system tank provides filtration when the system is in service to collect contaminants oxidized
by the hydrogen peroxide. These contaminants are backwashed from the media surface when
the system regenerates.
Matrixx Benefits
•
Iron & Sulfur Removal
•
Virtually maintenance free.
•
Improves the efficiency of water
-
using appliances
•
Simple installation
•
Safe for landscaping and lawn watering.
•
Compatible with all on
-
site and community wastewater treatment systems
Introduction
