15
4.
Install the weighted suction screen on the tubing that was inserted in the tank. Push
the tubing down in the tank until the weighted suction screen is around
1”
from the
bottom of the tank.
5.
Install the other end of the tank suction tube to the chemical injection pump inlet.
The inlet is identified by an arrow point toward the pump. Be sure the sleeve is in-
stalled on the tubing properly. The beveled side of the sleeve should be facing the
pump. Tight the nut hand tight holding the pump fitting. Do not use tools. Hand
tightening will be sufficient.
Chemical Solution Tank (with Pump) Installation Instructions
