20
1. To enter Main Menu, press
the
Menu/Enter
button. (Time
of Day will flash)
2. To set the
Time of Day
,
press the
Set/Change
button.
(First digit will flash)
•
To change digit value,
press the Set/Change but-
ton.
•
To accept the digit value,
press the Menu/Enter but-
ton.
•
Next digit will flash to
begin setting.
•
Once the last digit display
is accepted, all digits will
flash.
3. To set
A.M.
or
P.M.
, press the
Menu/Enter
button.
•
To change digit value, press the
Set/Change
button.
•
To accept the digit value, press the
Menu/Enter
button.
•
Once A.M. or P.M. is accepted, the next menu item will flash.
4. To set the Number of Days between Backwash Cycles(A), press the Set/Changebutton.
-
Repeat instructions from step (2).
Notes: 1) Maximum value is 29.
2) If value set to 0, Automatic Backwash will never occur.
3) Default setting is 7 days for filters
5. To Exit Main Menu, press the
Menu/Enter
button.
Note: If no buttons are pressed for 60 seconds, the Main Menu will be exited automatically.
Home Display
Alternates between the display of Time of Day and Number of Days until the Next Backwash.
-
Days Remaining until the Next Backwash will count down from the entered value until it reach-
es 1 day remaining.
-
A Backwash Cycle will then be initiated at the next designated regenera-
tion time.
Programming Using Onboard Buttons
