DS1093-095
19
2.4.1.2
Output mode
Click [Live] to pop up the interface shown as below. Now you could perform channel sequence setting.
Go to [Main menu
Display
Output] to enter into the output set interface shown as below.
Click [LIVE-OUT] in the Video Output option and set relative parameters shown as below for Main Video Output.
Click [SPOT-OUT] in the Video Output option and set relative parameters shown as below for Spot Video Output.
NOTE:
These screenshots are refered to Ref. 1093/019H
•
Video output:
Support CVBS output Main and Spot mode simultaneously (i.e. Spot Output is available only for
Ref.
1093/019H)
. LIVE -OUT is main video output, and SPOT-OUT is auxiliary video output.
•
SPOT Audio (if available in DVR Model):
It is possible to disable or enable this option for channel.
•
View Setup:
if this option is enabled, the user can set the channels sequence for View Mode Option.
•
SEQ Time
(
this option is available if View Setup option is disabled
): Seq Time option is set as 5 seconds default.
User can change the option as per request. The minimum time that can be set is 3 seconds.
•
View Mode (this option is available if View Setup option is enabled):
It is possible to set the Display Live Mode for
Main Video Output and Spot Video Output:
o
Live output: display window will include Single, Quad, 9-split and 16-split mode;
o
Spot output (if available): display window will include Single, Quad and 9-split mode;
Clicking on “
Define SEQ Setting”
is possible to set the sort about channels grid.
•
VGA/HDMI Resolution:
allow you select VGA or HDMI output, including 800x600, 1024x768, 1280x1024, 1440x900
and 1920x1080.
•
Video Out Control:
includes the following options:
o
HDMI: it is possible to upload the Menu Control settings when DVR is powered on for HDMI or VGA Video
Output.
o
VOUT: it is possible to upload the Menu Control settings when DVR is powered on for Main BNC Video
Output.
o
AUTO: it is possible to upload the Menu Control settings automatically when DVR is powered on for
VGA/HDMI or Main BNC Video Output, based on Monitor Type.
•
Transparency:
allow you adjust menu’s transparency, and its range is 1~128.
•
Margin:
allow you adjust the whole screen’s margin. Details operations please refer to the Picture above.
•
Volume:
allow you adjust the DVR volume shown as above.
