DS1093-095
15
2 SYSTEM INITIALIZATION
After connecting the Power cable of DVR to wall outlet and pressing the Power button on the front and/or rear panel, you
will enter into the system initializing screen shown as above.
2.1
MONITOR SELECTION
This Function allows to control the OSD Menu, switching BNC video Output and HDMI/VGA Video Output.
It is possible to switch the OSD Menu on video Output by DVR Front Panel:
Press and Hold ”
”
REWIND
Button (i.e. the Selection Button in right position of DVR Front Panel) for DVR
Models Ref.
1093/004H
, Ref.
1093/008H
and Ref.
1093/016H
. Release the button after audible warning.
Press and Hold ”
0
” Button (Numeric Button on DVR Front Panel) for DVR Models Ref.
1093/018H
and Ref.
1093/019H
. Release the button after audible warning.
It is also possible to switch the OSD Menu on video Output by Remote Control (i.e. Selecting
0 Button
), or select by
mouse the icon
from pop-up Menu (i.e. last icon on the right bottom of pop-up Menu displayed in the screen).
Wait till that the mouse pointer is displayed on Monitor.
