manualshive.com logo in svg

urmet domus 1061/004, Installation And Programming Manual, Page: 5 / 44

Share
Download
urmet domus 1061/004 Installation And Programming Manual Download Page 5

DS1061-015B

5

1.3.5 ELECTRONIC KEY – 1061/332

.

Programmable.electronic.key,.to.be.used.with.the.electronic.key.reader..

1.3.6 TRANSPONDER KEY – 1056/032 

Programmable.transponder.key,.to.be.used.with.the.proximity.reader.

1.3.7 PSTN TELEPHONE COMMUNICATOR – 1061/002

The.PSTn.telephone.communicator.can.be.programmed.with.the.control.panel.function.keys.or.with.PC.and.allows.to:

Send,.with.an.encoded.digital.link,.the.information.concerning.alarms.and.system.state.to.the.dedicated.alarm.reception.centres.

Send,.paired.with.the.speech.synthesis.card,.vocal.messages.by.telephone.calls..

Perform.a.remote.check.of.the.system,.by.DTMF.commands..

Perform.a.remote.management.of.the.system.and.check.its.operations.by.a.dedicated.application.software..

Environmental listening (paired with 1061/013).

1.3.8 GSM MODULE – 1061/458

The GSM Dual Band module can be programmed with the control panel function keys or with PC; it allows to:

Send,.paired.with.the.speech.synthesis.card,.vocal.alarm.messages.and.SMS..

Perform.a.remote.check.of.the.system,.by.DTMF.commands..

The.antenna.is.provided.with.the.product.

1.3.9 SPEECH SYNTHESIS CARD – 1061/012

The.speech.synthesis.card,.paired.with.the.PSTn.telephone.communicator.or.the.GSM.module,.allows.the.alarm.message.recording.

1.3.10 INFORMATIVE AND ENVIRONMENTAL LISTENING MODULE– 1061/013

The.informative.and.environmental.listening.module.allows.the.environmental.listening.by.a.telephone.call.(the.control.panel.must.be.provided.

with a PSTN telephone communicator) and the local playback of messages concerning system state, alarm, failure.

1.3.11 USB 2.0 INTERFACE – 1061/003

The.USB..0.interface.allows.to.connect.a.PC.to.the.1061/004.and.1061/006.control.panels.for.their.programming.(the.programming.and.remote.

assistance software is needed).

•

•

•

•

•

•

•

Summary of Contents for 1061/004













































Reviews:

No comments