10
R
ePLacing
the
g
Lass
:
The glass in the appliance is a high temperature ceramic. If the glass is damaged in any way, a factory
replacement is required (see
P
arts
l
Ist
). Wear gloves when handling damaged glass door assembly to
prevent personal injury. Do not operate with the glass front removed, cracked or broken. Removal and
replacement of the glass from the door must
be done by a licensed or qualified service person.
The glass
must be purchased from an Urbana dealer. No substitute materials are allowed. To remove the
door (see
M
aIntenance
a
nD
s
erVIce
- G
lass
D
oor
r
eMoVal
)
. The replacement glass will come with a new
gasket installed. Remove any silicone remnants from the door. Apply high temperature silicone around the
perimeter of the door and install the new piece of glass with gasket. Apply even pressure to the glass to allow
the silicone to adhere to the gasket material.
c
Leaning
D
ecoRative
s
uRFaces
:
Painted and porcelain faces should be wiped with a damp cloth periodically. Never clean the face when it is
hot. Do not use other cleaners as they may leave a residue, which can become permanently etched into the
surface.
s
aFety
s
cReen
R
emovaL
:
Figure 4: Safety Screen Removal (U44I and U44I-A models)
WARNING: Do not attempt to remove the safety screen until the unit has completely cooled.
There are four magnets that hold the safety screen into position (see Figure 4). To remove the safety screen,
it is easiest to grab with both hands on either side and lift up and bring outward. Upon installation, some
adjustment from left to right may be needed to center the surround.
Maintenance And Service
