50
e
LectRicaL
R
equiRements
:
WARNING: The appliance must be electrically connected and grounded in accordance with local
codes or, in the absence of local codes, with the current CSA C22.1 Canadian Electrical Code
Part 1, Safety Standards For Electrical Installations, or The National Electrical Code ANSI /
NFPA 70 in the US.
WARNING: Disconnect electrical power supply before working on receptacle wiring.
CAUTION: When servicing controls, label all wires prior to disconnection. Wiring errors can cause improper
and dangerous operation. Verify proper operation after servicing.
If any of the original wire supplied with
the appliance must be replaced, it must be replaced with 18 AWG wire with a temperature rating of 105°C.
Initial Installation
QUALIFIED INSTALLERS ONLY
Figure 73: Wiring Diagram
IFC
Main
Harness
885 Gas Valve
IPI Pilot
Burner
On/Off
To
Battery
Holder
Flame S
ensor
Spar
k E
lec
tr
o
de
Top Light
(G9, 25W, 120V)
Power Vent
(optional)
2A Fuse
L
N
IFC Reset
120VAC
