UNO
R
UNO
R
7
6
ENGLISH
To replace the internal lamp, please operate as follows:
• Disconnect the appliance from the power supply sys-
tem and let it cool down.
• Remove the lateral supports.
• Unscrew the glass cover and replace the lamp with one
with the same characteristics.
• Screw the glass cover back in.
• Reassemble the lateral supports.
2.2 REFIT OF THE SAFETY THERMOSTAT
The appliance is equipped with a safety thermostat with
manual recovery. This safety thermostat is needed to pro-
tect the appliance from overheating. In case it is needed,
it turns the appliance off.
This safety thermostat can be reached removing the black
cap you find on the bottom part of the back of the oven:
in case you need to refit it, push the key you have in the
center of the thermostat so that it starts working again.
3. MORE FREQUENT
BREAKDOWNS
CAUSE
SOLUTION
BREAKDOWN
The tension of the electrical
system is missing
Restore the tension
Safety thermostat intervention Refit the safety thermostat
The oven is completely turned
off
The connection to the electrical
system not made in the correct
way
Control the connection of the
appliance to the electrical
system
Damaged door basket
Contact
a
specialized
technician for reparation
There is water coming out of
the cavity from the door
gasket, even though the door
is closed
Loosened door mechanism
Contact
a
specialized
technician for reparation
Burnt lamp
Sostituire la lampadina
The oven light (if present) does
not turn on
Loosened lamp
Inserire in maniera corretta la
lampadina nel portalampade
The fans do not reverse the
rotating direction
Contact
a
specialized
technician for reparation
One of the fans do not work (in
case that you have an oven
with more than one motor)
Contact
a
specialized
technician for reparation
The cooking results are even
The heating element is broken Contact
a
specialized
technician for reparation
9
Substitute the lamp
Fix the lamp in the lamp holder cor-
rectly
3. MORE FREQUENT BREAKDOWNS
CAUSE
SOLUTION
