![background image](http://html1.mh-extra.com/html/unitec/5-1026/5-1026_operation-and-maintenance-manual_3978697012.webp)
P n e u m a t i c
C h a i n S a w
5 1 0 2 6 – 5 1 0 2 9
51026_51029_BA_en_Version_05
Page
11
of
34
Pay attention to the position of the trunk and to the forces which close the cutting slot and
can jam the chain
Do only work with an appropriately sharpened and tensioned chain. The clearance of the depth
limiter should not be too large.
Decreasing the danger of accidents
Quick-stop chain-brake:
With this the danger of injuring can be reduced in certain situations, but the kickback itself
cannot be avoided. When releasing the chain-brake the chain comes to standstill in a split
second as described in paragraph „Chain-break“.
Cutting set:
Kickback arms, properly sharpened chains as well as a bar with a little bar head
decrease danger of kickback.
It is a lot safer to avoid kickback with clever and proper work.
Avoid drawing in and rebound!
A = To draw in
If at the cutting with the subside of the bar (forehand-cut), the chain jams or touches a tough
object in the wood, the chain saw can be abruptly pulled towards to the trunk.
The spiked strip shall always be fixed safely!
CS Unitec, Inc.
• Toll-free: 800-700-5919 • Ph: 1-203-853-9522 • Email: [email protected] •
www.csunitec.com
Translation of the original manual
compiled: 20.04.16