P n e u m a t i c
C h a i n S a w
5 1 0 2 6 – 5 1 0 2 9
51026_51029_BA_en_Version_05
Page
25
of
34
Replacing broken drive links
(Grind off rivet heads if necessary)
Lay chain in the corresponding recess of the anvil with the cutting tooth always pointing
upward. Press out rivets
Installation of new parts
1. File the running surface of new
2. Place coupling link with
chain links so that they are the
rivets on a flat surface.
the same as those of the worn links.
File back new cutting teeth so that
they correspond to the worn ones.
3. Join ends of chain.
4. Place side plate of coupling
link with mark facing up.
Flatten rivet heads with ball end of
hammer.
Rivet Removal
9 2550 0040
correct
wrong
CS Unitec, Inc.
• Toll-free: 800-700-5919 • Ph: 1-203-853-9522 • Email: [email protected] •
www.csunitec.com
Translation of the original manual
compiled: 20.04.16
