![background image](http://html1.mh-extra.com/html/unitec/5-1026/5-1026_operation-and-maintenance-manual_3978697024.webp)
P n e u m a t i c
C h a i n S a w
5 1 0 2 6 – 5 1 0 2 9
51026_51029_BA_en_Version_05
Page
23
of
34
Chain shrinks during cooling. A chain which is not relieved from tension can possibly damage the
bearings.
A longer shut down of the machine:
Look at chapter „Storing the saw“
Sharpening the chain
Lowering the depth limiter
1.
When sharpening your chain with a file holder, the clearance of the depth limiter must be checked
and adjusted, if necessary after sharpening.
2.
Check the clearance of the depth limit at least after every third sharpening, and after every
sharpening when cutting frozen wood.
3.
Place depth limiter gauge on cutting tooth. If depth limiter is too high, file off protruding part with a
flat file (Fig. 1)
4.
Round off front edge of depth limiter. Its original shape must be preserved (Fig. 2).
General Filing Instructions
1. Place file holder on top of tooth and depth limiter.
2. First file all cutting teeth
3. Keep marks on file
on one side using an outward,
holder parallel to chain.
cutting stroke. Then file the cutting
teeth on the other side.
Fig 2
Fig 1
angular
mark
File holder
file
CS Unitec, Inc.
• Toll-free: 800-700-5919 • Ph: 1-203-853-9522 • Email: [email protected] •
www.csunitec.com
Translation of the original manual
compiled: 20.04.16