P n e u m a t i c
C h a i n S a w
5 1 0 2 6 – 5 1 0 2 9
Translation of the original manual
compiled: 20.04.16
51026_51029_BA_en_Version_05
Page
15
of
34
ATTENTION!
In case of malfunction of the chain brake, stop chain saw immediately – Risk of injury!
Contact
CS Unitec
service!
Do not use the chain saw until this problem is not solved (see chapter „Chain brake“).
Assembling of bar and chain
Pitch of the chain has to be adjusted to spacing of the sprocket and the bar and the thickness of
drive link has to be adjusted to the width of the groove of the bar.
Turn-off nuts and remove cover.
Turn adjusting wheel to the left, until clamp nut (2) lies close to the left of housing recess.
Loosening the chain-brake:
Press hand protection (3) against the pipe handle.
Pull on protecting gloves. Put on the chain (starting at the bar nose).
CS Unitec, Inc.
• Toll-free: 800-700-5919 • Ph: 1-203-853-9522 • Email: [email protected] •
www.csunitec.com
