![background image](http://html1.mh-extra.com/html/unitec/5-1026/5-1026_operation-and-maintenance-manual_3978697007.webp)
P n e u m a t i c
C h a i n S a w
5 1 0 2 6 – 5 1 0 2 9
51026_51029_BA_en_Version_05
Page
6
of
34
Owner Obligations
Generally, the machine operator is responsible for correct conditions/ operation of the machine and
adherence to the safety regulations. The machine is built according to the level of technology and
the recognized technical safety regulations. However there is still a risk of accidents to the operator
or third parties or damage to the machine or other objects.
All current regulations and specifications which apply to the site of operation in regards to accident
prevention, installation of electrical and mechanical systems as well as radio interference must be
observed.
IMPORTANT
The operator must make sure that…
Assessment of the specific risks, which can occur due to any use of the machine,
was done
the function of the safety equipment is regularly checked.
the safety symbols and safety notes on the machine/device and the operating instruction booklet
are observed.
the safety instructions and the operating instruction booklet are available completely and in
legible condition on site with the machine.
The operator is obliged to only allow personnel to work on the machine who…
are familiar with the basic work environment safety rules and accident preventing regulations
and who have have been instructed in the correct use of the machine.
have read and understood the safety and warning notes in the operating instruction booklet as
well as all other documentation pertaining to the machine.
have been tested at regular intervals in regards to their safety-conscious operation of the
machine.
Safety-conscious operation
Additionally to the safety instructions listed in this booklet and to the intended use, the following
safety instructions are valid:
Accident prevention instructions, safety and operation regulations
Explosion protection directives
Safety rules for handling dangerous substances
Standards and laws being effective
Operator Obligations
All persons who are assigned to work with the machine are obligated to:
- always pay attention to the basic safety and accident preventing regulations.
- always read and follow the safety and warning notes in the operating instruction booklet.
CS Unitec, Inc.
• Toll-free: 800-700-5919 • Ph: 1-203-853-9522 • Email: [email protected] •
www.csunitec.com
Translation of the original manual
compiled: 20.04.16