![background image](http://html1.mh-extra.com/html/unitec/5-1026/5-1026_operation-and-maintenance-manual_3978697006.webp)
P n e u m a t i c
C h a i n S a w
5 1 0 2 6 – 5 1 0 2 9
51026_51029_BA_en_Version_05
Page
5
of
34
Signal Word and Symbol Definition
The signal words and symbols used in the technical documentation (safety instructions, operating
booklet, etc.) have the following meaning:
DANGER
Indicates an
immediate danger,
which causes serious injuries or even death,
if not avoided.
WARNING
Indicates a
threatening danger
, which can cause serious injuries or even
death, if not avoided.
CAUTION
Indicates
a danger or unsafe procedure
which can cause injuries to a person
or material damages, if not avoided.
Notice
Indicates a potentially dangerous situation which can cause damage to the
product or its surroundings, if not avoided.
ACHTUNG – Danger of explosion
Complementary regulations and instructions apply in explosive areas.
Observe the safety instructions of the employer as well.
NOTICE
Gives recommendations and important hints for handling the product.
IMPORTANT
Indicates tips and other particularly useful information.
REMARK:
In each case the symbol used cannot replace the safety text. The text must always be fully read. In
some cases other symbols will be used with the signal words.
The normative symbol
was replaced by an informative symbol
, in order to increase the
attention.
CS Unitec, Inc.
• Toll-free: 800-700-5919 • Ph: 1-203-853-9522 • Email: [email protected] •
www.csunitec.com
Translation of the original manual
compiled: 20.04.16