User Manual
Genie Joystick
Nov 07
©Unique Perspectives Ltd.
www.click2go.ie
Page 71
Cause
There is a fault in an accessory device attached to a
DX Module (excluding the PM). Examples of faults in
accessory devices may be: the clutch is, or has
been, disengaged; a light bulb is short or open
circuit; an actuator terminal is shorted to B
Action
?
Check all accessory devices connected to your
DX System
3
Left (M1) Motor Fault
Cause
The connection from the PM Left (M1) connector to
its associated motor, or the motor itself, is defective.
The connection is either open or short circuit.
Action
?
Disconnect the left motor plug and check
continuity between the motor pins on M1
4
Right (M2) Motor Fault
Cause
The connection from the PM Right (M2) connector to
its associated motor, or the motor itself, is defective.
The connection is either open or short circuit.
Action
?
Disconnect the right motor plug and check
continuity between the motor pins on M2
5
Left (M1) Park Brake Fault
Cause
The M1 plug connection to its associated park brake
is either open or short circuit
Action
?
Disconnect the M1 plug and check continuity
between the two positronic park brake pins
6
Right (M2) Park Brake Fault
Cause
The M2 plug connection to its associated park brake
is either open or short circuit
Action
?
Disconnect the M2 plug and check continuity
between the two positronic park brake pins
7
Low Battery Fault
Cause
The battery charge is not sufficient to allow safe
driving. It has fallen below 17V
Action
?
Check the battery connection and terminals. The
battery voltage should be similar when the
battery is on charge, and when it isn’t.
?
Check that fuses have not blown, or circuit
breakers tripped.
?
Replace battery if worn out or if capacity is
insufficient for the user’s needs.
Summary of Contents for Genie
Page 82: ......
