User Manual
Genie Joystick
Nov 07
©Unique Perspectives Ltd.
www.click2go.ie
Page 10
Drive Profile Select
Forward/Back movements of the joystick select the
desired drive profile. Alternatively the drive profile can
be chosen on start up by holding down switch 1 until
the drive profile number starts changing and releasing
switch 1 when the desired number is displayed.
Power Off
This is a special mode that simply turns off the chair. It
is for users who cannot operate a second switch.
Mode Selection
methods
Several different methods of selecting the above
modes are possible. Choosing the correct selection
method is an important part of setting up the Genie
joystick to meet the needs and abilities of the user.
“Switch Only”
By pressing and holding switch 1 the display toggles through
symbols representing each mode. Release switch 1 when the
desired mode is displayed.
“ Joystick”
Press switch 1 to enter mode selection. The display shows a
symbol representing the first mode. Pressing switch 1 again goes
on to the symbol for the next mode. Deflecting the joystick
forward selects the mode that is displayed.
“Jo Switch”
Press switch 1 to enter mode selection. The display shows a
symbol representing the first mode. Deflecting the joystick
forward goes onto the symbol for the next mode. Deflecting the
joystick backwards goes back to the symbol for the previous
mode. Pressing switch 1 selects the mode that is displayed.
“Joystick only”
A backwards flick of the joystick selects mode selection. The
display shows a symbol representing the first mode. Deflecting
the joystick forward goes onto the symbol for the next mode. A
backwards flick of the joystick selects the mode that is displayed.
Programming button
The selection method of the Genie joystick, the
number and type of operating modes and other
options can be programmed without the use of a
computer or other external device. The program button
is located through a hole at the front of the device and
pressing this sets the Genie joystick in program mode.
All the options can be set by using switch 1, switch 2,
the 7 segment display and the battery gauge.
RJM compatible
The Genie joystick is compatible with all DX remote
joystick modules and these can be used instead of the
joystick on the Genie if so required. The only
restriction in this method of operation is that mouse
movements are always non-proportional, i.e. a fixed
speed.
Summary of Contents for Genie
Page 82: ......
