User Manual
Genie Joystick
Nov 07
©Unique Perspectives Ltd.
www.click2go.ie
Page 62
Creating Your Own Set of Operation Modes
With the Genie it is possible to choose not only what operation modes will be
accessible for a particular user but also in what order the will be presented.
The Genie Joystick program page 4 allows the technician to create a unique set
of operation modes.
To create your own set of modes
1. Select page 4 within the program mode (4 flashes of the decimal point)
2. The symbol in the 7 segment display indicates the current “first” mode.
3. Use short clicks of switch 1 to display the “first” mode you want.
4. When it is displayed press and hold switch 1 until the Genie beeps. The
chosen mode for this step is stored and a new step begins.
5. Repeat from step 3 until you have entered all the steps of your set. Note
that you can not exceed 6 steps, i.e. no more than 6 modes anyway.
6. When you have finished entering your set press and release switch 2. The
steps are stored in the Genie Joystick and normal operation resumes.
7. To enable your set you must re-enter program mode and change the
parameter ‘Enable_My_Set’ from ‘N’ to ‘Y’.
Note
:
?
When you store the first step of a new set the previous set is erased. In
other-words you cannot edit a set, just replace it.
Resetting Parameters to Factory Values
At some stage you may want to reset all the parameters to the factory values.
The factory values are those listed as the default values in the parameter
adjustment tables.
To reset the parameters to factory values
1. Make sure the Genie Joystick is on.
2. Make sure the Genie Joystick is not in program mode.
Summary of Contents for Genie
Page 82: ......
