7.3 Operation
View : Configuration
Click on “View : Configuration” to toggle visibility of the “Configuration” tab. The Configuration tab is used to configure
the SQM with its calibration values when calibrated light and dark settings are being performed.
View : Log
shows a window of commands and responses sent to and received from the SQM during this session of
running UDM. Some excessively repetitive commands are suppressed from this listing.
Figure 7.5: View : Log
View : Directories
shows the directory paths used by UDM to store and retrieve data.
Figure 7.6: View:Directories
Logs Directory Path
shows the path where logged records are kept. These logged records are created when using the
“Log one Record” or “Log Continuously” features. Also, log files from data-logging meters will be stored here from the
“Retrieve All” function.
The “Logs Directory Path” path can be changed from its default by pressing the folder button the right. After the
path has been changed, new log files will be stored in that new folder.
TZ database path
The Time Zone information is required for datalogging purposes because the timestamp is logged
as UTC. Since time zones change over the years, the entire Time Zone database is required and hence distributed with
UDM and stored at the displayed “TZ database path”. This path is not changeable.
The Time Zone database is taken from:
http://www.twinsun.com/tz/tz-link.htm
Firmware files path
The firmware for the SQM-LU-DL-V can be updated or reverted using UDM. These firmware files
are stored at the displayed firmware files path. This path is not changeable.
Unihedron SQM-LU-DL-V Operator’s Manual -
20211013
31
Summary of Contents for SQM-LU-DL-V
Page 2: ......
Page 104: ...14 Glossary 104 Unihedron SQM LU DL V Operator s Manual 20211013...
