Unihedron SQM-LU-DL-V, Operator'S Manual

Page: 62 / 105

8 Commands and responses
The following is a list of the ”Data logger” commands:
Table 8.2: Summary of datalogger commands
Command Description
L0x
Report on FLASH chip Manufacturer ID, and Device ID.
L1x
Report on logging pointer.
LZx
Report on logging capacity.
L2x
Erase entire FLASH chip contents.
L3x
Log one record.
L4...x
Return one record.
L5x
Get battery voltage.
L6x
Get status register1.
L7x
Report on bytes per FLASH, bytes per record.
LM.x
Set Logging trigger mode, next digit defines mode.
Lmx
Get Logging trigger mode.
LIx
Logging Interval settings requested.
LPS...x
Logging Interval period set in seconds.
LPM...x
Logging Interval period set in minutes.
LT...x
Logging Threshold for interval reports set.
Lcx
Get real time clock data.
LC...x
Set real time clock data.
Lsx
Put unit to sleep.
Lax
Get alarm data.
The following is a list of the “Vector” model commands:
Table 8.3: Summary of vector commands
Command Description
v1x Magnetic readings.
v2x Acceleration readings.
v3. . . x Save/Get Acceleration calibration (v3x or v3,-12345, ...x or v3, 12345, ... x).
v4. . . x Save/Get Magnetic calibration.
vvx Vibration report.
vtx Get Vibration threshold.
vTx Set Vibration threshold.
62
Unihedron SQM-LU-DL-V Operator’s Manual -
20211013