7.3 Operation
Press the “Correct .dat file” button to write the corrected file to disk. The location of the new file is shown in the
bottom Filename section.
Tools : .dat reconstruct local time
If the datalogger timezone was not set properly, This tool can be used to recreate the local time values in the .dat file.
Figure 7.16: Tool : .dat local time reconstruction
Select the desired .dat file to reconstruct.
Select the proper region and time zone.
Press the “Reconstruct .dat local times” button
The reconstructed file will be written to disk at the location specified in the bottom Filename section.
Tools : .dat time correction
7.3.7 Help menu
Figure 7.17: Help menu
Help : Cmdline Info
shows the commands that can be used when starting UDM from the command line.
Help : Version Info
shows the detailed version information for the UDM software.
Help : About
displays a simple screen with the version identifier.
Unihedron SQM-LU-DL-V Operator’s Manual -
20211013
39
Summary of Contents for SQM-LU-DL-V
Page 2: ......
Page 104: ...14 Glossary 104 Unihedron SQM LU DL V Operator s Manual 20211013...
