7.9 Configuration tab
4. Select the appropriate firmware like SQM-LU-DL-4-6.67.hex
5. Press the ”START UNPLUG METHOD button
6. Follow the instructions shown on the right side of the button.
7.9 Configuration tab
The “Configuration tab” shows the factory-set calibration values.
Calibration is performed at the Unihedron factory. A new calibration using a calibrated light source and darkroom can
be performed by following the instructions on the right side of the screen. The calibration report can be logged to a data
file and also printed out from this screen.
Figure 7.38: Configuration tab
Warning confirmations as shown in Figure 7.39 and Figure 7.40 are shown when trying to calibrate the unit yourself:
Figure 7.39: Light calibration confirmation
Figure 7.40: Dark calibration confirmation
7.9.1 Sensor arrangement
For documentation purposes, the SQM-LU-DL-V can store information on the sensor arrangement (starting at firmware
feature 35 and above). The type of Lensholder, Lens, and Filter can be defined.
Unihedron SQM-LU-DL-V Operator’s Manual -
20211013
51
Summary of Contents for SQM-LU-DL-V
Page 2: ......
Page 104: ...14 Glossary 104 Unihedron SQM LU DL V Operator s Manual 20211013...
