7 Unihedron Device Manager
7.3 Operation
After starting UDM, a list of found devices should appear, if your device is not listed on the screen, try clicking “Find”
once more to search for connected devices.
If more than one SQM device is found, then you will have to select (click) on one of the devices, otherwise if only one
device is found, then click on “Version” or “Reading” of the information tab for more information.
The tabs can be used to select various functions when working with your selected device. These tabs and their functions
are described further in this document.
7.3.1 Start up
After starting the UDM program, a splash screen shown in Figure 7.1 is temporarily shown while the program searches
for attached devices.
Figure 7.1: Splash screen
1. UDM searches for attached USB devices first. This step is fairly quick (a few seconds).
2. UDM then searches for attached Ethernet devices within the reach of the Ethernet network but not outside a firewall.
This step may take about 30 seconds.
If no devices are found, then the main UDM program will be shown with the “found devices box” empty. You can
attach an SQM device to your computer and press the “Find” button to search for the newly connected devices.
If you know that an Ethernet device is connected but it does not show up, then a network problem may be the cause.
Also check the power connection to the SQM-LE.
If you know that a USB device is connected but it does not show up, then there may be a device driver issue. Check
the USB device listing for your operating system. These USB devices should appear as a COMM port. Also, check the
troubleshooting notes in section 13 on page 98 for possible solutions.
7.3.2 Main screen
The main screen of UDM consist of the following sections:
28
Unihedron SQM-LU-DL-V Operator’s Manual -
20211013
Summary of Contents for SQM-LU-DL-V
Page 2: ......
Page 104: ...14 Glossary 104 Unihedron SQM LU DL V Operator s Manual 20211013...
