UBCD396XT
38
Create at least 1 frequency in each site
Each LTR system can contain up to 20 frequencies in each site, and all sites must
contain at least 1 frequency.
1.
On the
Edit Site
menu, select the site you just created.
2.
Go to the
Set Frequencies
sub-menu and select
New Frequency
.
3.
Enter at least 1 frequency for this site.
4.
When you enter a new frequency, the scanner will prompt you for the
logical
channel number or
LCN
for that frequency. Enter a number from 1 through
20.
5.
If you need to change any of the frequency properties, you can do that now.
Unless a property is
Required
, you can operate the system without changing
the default settings.
Frequency properties
All of these options can be found by selecting the frequency under the
Set
Frequencies
sub-menu. If necessary, the sub-menu and option name on each
scanner are listed beside the property.
Property Option
name
Required
Logical channel number
Input LCN
Recommended
None
Optional
Lockout
Set Lockout
Available operations
Delete a frequency
Delete Frequency
Programming a system for Scanning
Once you create the system and at least 1 site, you can
Search
the system with no
problems. However, if you want to
Scan
the system, you'll need to program the
required elements in following order.
Summary of Contents for UBCD396XT
