Uniden UBCD396XT, Owner'S Manual

Page: 56 / 203

UBCD396XT
42
13. Motorola Trunked Systems
Please note that these pages are meant as general instructions.
A Motorola system can be an 800 MHz, 400 MHz (UHF), or 100-200 MHz (VHF)
system.
Programming a Motorola System
To program a Motorola system, you'll need to program the required elements in
following order:
Create a system
1. Go to the Program System menu and choose
New System
.
2. The scanner will prompt you for the System Type. Select
MOT
.
3. When the scanner prompts you confirm, tap
YES
.
4. The scanner creates the system with a default name. Select Edit Name if you
want to change it.
5. If you need to change any of the system properties, you can do that now.
Unless a property is
Required
, you can operate the system without changing
the default settings.
System properties
All of these options can be found under your scanner's
Program System menu. If
necessary, the submenu and option name on each scanner are listed beside the
property.
Property Option name
Required
Fleet map
Edit Fleet Map (Required for
Motorola Type I or Type I/II Hybrid
systems only)
Recommended
Name
Edit Name
Number tag
Set Number Tag
Optional
Automatic Gain Control
(AGC)
Set Audio AGC