Uniden UBCD396XT, Owner'S Manual

Page: 100 / 203

UBCD396XT
86
24. Setting alerts
Your scanner can trigger alerts for several different events. The table below shows
the different alerts and how to program them:
To sound an alert when Follow these steps
A channel becomes active Edit the channel properties ( Edit
Channel#Set Alert ):
1. Go to the
Program System
menu and select
the system that contains the channel you
want set the alert for.
2. Select
Edit Group
, then select the group you
want.
3. Select Edit Channel , then select the channel
you want to set the alert for.
4. Select
Set Alert
.
5.
Choose the
Alert Tone
and
Alert
1.
Light
you want the scanner to use.
An active Talk Group on a
system contains an emergency
flag Edit the system properties ( Edit Sys
Option#Emergency Alert ):
1. Go to the
Program System
menu and select
the system you want set the alert for.
2. Select Edit Sys Option , then select
2.
Emergency Alert
.
3.
Choose the
Alert Tone
and
Alert
4.
Light
you want the scanner to use.
The scanner detects a Close
Call hit Edit the Close Call properties:
1. Go to the
Close Call
menu.
2. Select
Set CC Alert
.
3.
Choose the
Alert Tone
and
Alert
Light
you want the scanner to use.
4. For Close Call Alerts, you can also have the
scanner pause before it resumes searching.
Select
Set CC Pause
to activate this feature.
The scanner gets a hit on a
Tone-Out
channel Edit the Tone-Out channel properties:
1. Go to the Tone-Out for... menu.
2. Select
Tone-Out Setup
, then select the