UBCD396XT
7
4. Using Preloaded Systems
Your scanner is factory preloaded with systems by state. The systems contain
frequency groups for emergency services, see notes below. If you are fortunate
enough to live in an area where one of these systems can be received, then you
might have something to listen to right out of the box.
Note!
Preloaded systems are not intended as final programming: You'll need to set the
scanner up to suit what you really want to listen to. This is just intended to show
that the scanner really works and gives you something to monitor while you get
your own programming taken care of.
Note!
System information changes all the time. The preloaded systems were accurately
programmed several months prior to first production. It is possible that a system
preloaded in the scanner is no longer operational with the preloaded settings.
Preloaded Systems
ACT Public
NSW Public
NSW-GRN MOT
NT Public
NZ Public
QLD Public
SA Public
SA-GRN MOT
TAS Public
VIC Public
WA Public
Summary of Contents for UBCD396XT
