UBCD396XT
53
15. Standard P25 Trunked Systems
This section deals with standard Project 25 or
P25
systems.
Programming a P25 System
To program a P25 system, you'll need to program the required elements in following order:
Create a system
1.
Go to the
Program System
menu and choose
New System
.
2.
The scanner will prompt you for the System Type. Select
P25
.
3.
The scanner will prompt you for the sub-type. Select
Standard trunk
.
4.
When the scanner prompts you confirm, tap
YES
.
5.
The scanner creates the system with a default name. Select
Edit Name
if you
want to change it.
6.
If you need to change any of the system properties, you can do that now.
Unless a property is
Required
, you can operate the system without changing
the default settings.
System properties
All of these options can be found under your scanner's
Program System
menu. If
necessary, the submenu and option name on each scanner are listed beside the
property.
Property Option
name
Required
None
Recommended
Name
Edit Name
Number tag
Set Number Tag
Optional
Automatic Gain Control
(AGC)
Set Audio AGC
Delay time
Set Delay Time
ID format
Set ID Format (DEC/HEX)
ID scan/search
ID Scan/Search
Priority ID scan
Priority ID Scan
Available operations
Copy a system
Copy System
Summary of Contents for UBCD396XT
