Uniden UBCD396XT, Owner'S Manual

Page: 45 / 203

UBCD396XT
31
Programming a system for Scanning
Once you create the system and at least 1 site, you can
Search the system with no problems.
However, if you want to Scan the system, you'll need to program the required elements in
following order:
Create at least 1 channel group
Each EDACS system can contain up to 20 channel groups, and any system you
want to scan must contain at least 1 channel group.
1. On the Program System menu, select the system you just created.
2. Go to the Edit Group menu and select
New Group
.
3. If you need to change any of the channel group properties, you can do that
now. Unless a property is
Required
, you can operate the system without
changing the default settings.
Channel group properties
All of these options can be found by selecting the group name under your scanner's
Edit Group menu. If necessary, the sub-menu and option name on each scanner are
listed beside the property.
Property Option name
Required
None
Recommended
Name Edit Name
Quick key Set Quick Key
Optional
Location information Set Location Info
Lockout Set Lockout
Available operations
Delete a group Delete Group
Create at least 1 channel in each group
Each trunked system can contain up to 500 channels.