![background image](http://html1.mh-extra.com/html/unicarriers/frsb14-8/frsb14-8_operation-and-maintenance-manual_3734855060.webp)
INSTRUMENTS AND CONTROLS
INSTRUMENTS AND CONTROLS
2-16
2-16
ACCELERATOR PEDAL [1]
ACCELERATOR PEDAL [1]
You can move the truck by pressing the accelerator
You can move the truck by pressing the accelerator
pedal while the direction shift switch is in forward or
pedal while the direction shift switch is in forward or
reverse, and the foot switch [3] is depressed.
reverse, and the foot switch [3] is depressed.
The traveling speed can be controlled smoothly by
The traveling speed can be controlled smoothly by
varying the amount of pressure on the accelerator
varying the amount of pressure on the accelerator
pedal. The traveling speed is displayed as a direct
pedal. The traveling speed is displayed as a direct
numeric readout on the instrument panel.
numeric readout on the instrument panel.
BRAKE PEDAL [2]
BRAKE PEDAL [2]
WARNING
WARNING
Avoid hard braking. You might be thrown out of
Avoid hard braking. You might be thrown out of
the truck by the sudden stop or the load
the truck by the sudden stop or the load
might fall
might fall
off the forks. Abusing the brakes by hard braking
off the forks. Abusing the brakes by hard braking
will cause shorten the life of the electromagnetic
will cause shorten the life of the electromagnetic
brake system.
brake system.
The brake is applied by depressing the brake pedal. The
The brake is applied by depressing the brake pedal. The
braking force can be controlled by varying the amount of
braking force can be controlled by varying the amount of
pressure on the brake pedal. When the brake pedal is
pressure on the brake pedal. When the brake pedal is
pressed down all the
pressed down all the
way
way
, the maximum braking force
, the maximum braking force
is
is
applied and also the drive power circuit is disconnected.
applied and also the drive power circuit is disconnected.
The brake pedal is only operable when the key switch is
The brake pedal is only operable when the key switch is
in the ON position.
in the ON position.
REGENERA
REGENERA
TIVE BRAKING
TIVE BRAKING
(ELECTRONIC BRAKING)
(ELECTRONIC BRAKING)
Regenerative braking is put into effect whenever
Regenerative braking is put into effect whenever
you reverse the direction shift switch or release the
you reverse the direction shift switch or release the
accelerator pedal.
accelerator pedal.
When the accelerator pedal is released
When the accelerator pedal is released
Regenerative braking (electronic braking) is in effect
Regenerative braking (electronic braking) is in effect
when the accelerator pedal is released while the reach
when the accelerator pedal is released while the reach
truck is traveling.
truck is traveling.
During switchback operations
During switchback operations
Regenerative braking (electronic braking) occurs during
Regenerative braking (electronic braking) occurs during
switchback operations or when the direction shift
switchback operations or when the direction shift
switch is reversed. This braking force can be adjusted
switch is reversed. This braking force can be adjusted
by varying the amount of pressure on the accelerator
by varying the amount of pressure on the accelerator
pedal.
pedal.
3
3
2
2
1
1
https://www.forkliftpdfmanuals.com/
Summary of Contents for FRSB14-8
