PREOPERA
PREOPERA
TIONAL
TIONAL
CHECKS
CHECKS
4-7
4-7
19
19
BACK-UP
BACK-UP
BUZZER
BUZZER
Place the direction shift switch in the reverse travel
Place the direction shift switch in the reverse travel
position to check if the back-up buzzer sounds.
position to check if the back-up buzzer sounds.
20
20
LIGHTS
LIGHTS
Turn on the lighting switch to check if the work lights are
Turn on the lighting switch to check if the work lights are
turned on and off properly. Check also that the lenses
turned on and off properly. Check also that the lenses
are clean and intact.
are clean and intact.
If the truck comes equipped with optional turn signals or
If the truck comes equipped with optional turn signals or
headlights, check them too.
headlights, check them too.
21
21
LOAD
LOAD
HANDLING
HANDLING
LEVERS
LEVERS
Move the load handling levers (lift, tilt, reach and side-
Move the load handling levers (lift, tilt, reach and side-
shift) through their full range twice or three times to
shift) through their full range twice or three times to
check if the forks and mast operate smoothly without
check if the forks and mast operate smoothly without
squeaking.
squeaking.
Also check the levers for looseness.
Also check the levers for looseness.
NOTE
NOTE
WARMING UP CYLINDERS
WARMING UP CYLINDERS
Before starting the day’s work or your shift, warm up
Before starting the day’s work or your shift, warm up
the cylinders. This lubricates packings and seals in
the cylinders. This lubricates packings and seals in
the cylinders to make them ready for operation.
the cylinders to make them ready for operation.
1
1
1
1
:
:
WORK
WORK
LIGHT
LIGHT
LOAD HANDLING LEVERS
LOAD HANDLING LEVERS
Advance the mast fully and turn off the key switch before performing the following
Advance the mast fully and turn off the key switch before performing the following
checks:
checks:
WARNING
WARNING
•
•
When performing
When performing
the following
the following
checks, extra
checks, extra
caution must be exercised to avoid getting
caution must be exercised to avoid getting
caught in the truck parts, entanglement of the
caught in the truck parts, entanglement of the
body in rotating parts, or falling.
body in rotating parts, or falling.
•
•
W h e n c h e c k i n g t h e t r u c k w i t h t h e m a s t
W h e n c h e c k i n g t h e t r u c k w i t h t h e m a s t
advanced, put a pallet or something rigid
advanced, put a pallet or something rigid
between the mast and the truck frame, so that
between the mast and the truck frame, so that
you will not be caught in between.
you will not be caught in between.
https://www.forkliftpdfmanuals.com/
Summary of Contents for FRSB14-8
