UniCarriers FRSB14-8, Operation & Maintenance Manual

Page: 106 / 136

PERIODIC INSPECTION PERIODIC INSPECTION
4-12 4-12
MONTHLY (200 OPERATING HOURS) MONTHLY (200 OPERATING HOURS)
CHECKS CHECKS
Check the following items in addition to preoperational Check the following items in addition to preoperational
and weekly (50 operating hours) checks. and weekly (50 operating hours) checks.
Adjustment Adjustment and and replacement replacement of of components components and and parts parts
listed as monthly check items are difficult and need listed as monthly check items are difficult and need
sufcient technical knowledge and special tools. sufcient technical knowledge and special tools.
It is recommended that one-month or longer periodic It is recommended that one-month or longer periodic
inspection be left to a specialist or your authorized inspection be left to a specialist or your authorized
dealer. dealer.
Items to be checked Items to be checked
• •
Battery – Battery – Give an Give an equalizing charge equalizing charge
• •
Battery connectors – C Battery connectors – Check for damage heck for damage
and looseness. and looseness.
• •
W i r i n g – C h e c k f o r d a m a g e a n d W i r i n g – C h e c k f o r d a m a g e a n d
discoloration. discoloration.
• •
Contacts – Contacts – Check Check for roughness. for roughness.
• •
Controller – Clean Controller – Clean and check for and check for loose loose
connections. connections.
• •
D i r e c t i o n s h i f t s w i t c h – C h e c k f o r D i r e c t i o n s h i f t s w i t c h – C h e c k f o r
operation and looseness operation and looseness
• •
Accele Accele rator pedal rator pedal – – Check for Check for prope prope rr
operation and looseness operation and looseness
• •
Safety circuit Safety circuit – Check – Check for operation. for operation.
• •
Brake linkage Brake linkage – Check – Check for looseness for looseness
• •
Wheel mounting nuts Wheel mounting nuts and bolts – and bolts – Check Check
for looseness for looseness
• •
Wheel bearings – C Wheel bearings – Check for loosene heck for looseness, ss,
noise and lubrication noise and lubrication
• •
Drive unit – Check oil for level and Drive unit – Check oil for level and
contamination contamination
• •
Drive unit Drive unit – Check – Check for noise, dam for noise, damage and age and
cracks cracks
• •
Lift Lift chains chains – – Lubricate Lubricate
• •
Val Valve control lever ve control lever micro-switch – micro-switch – Check Check
for proper operation and damage for proper operation and damage
• •
Relief valve Relief valve – Check – Check for proper for proper operation operation
• •
H o s e r e e l – C h e c k f o r o p e r a t i o n , H o s e r e e l – C h e c k f o r o p e r a t i o n ,
looseness, cracks looseness, cracks
• •
Reach guide Reach guide – Check – Check for looseness for looseness
• •
Sheaves – Check Sheaves – Check for proper for proper operation, operation,
damage and looseness damage and looseness
• •
Rollers (end, Rollers (end, side and side and retaining) – retaining) – Check Check
for proper operation, looseness and for proper operation, looseness and
damage
damage
• •
Fork carr Fork carriage plate iage plate – Check – Check for operation, for operation,
looseness, cracks or bends looseness, cracks or bends
• •
Mast – Mast – Apply grease on the piston Apply grease on the piston head head
guide guide
• •
Inne Inne r r chan chan nel – nel – Apply grease on end Apply grease on end
roller rolling surface roller rolling surface
• •
Major bolts Major bolts and nuts – and nuts – Retighten (new Retighten (new lift lift
trucks only) trucks only)
• •
Battery stopper – Battery stopper – Check rubber part Check rubber part for for
missing missing
• •
Attachmen Attachmen t – t – Check for Check for operation operation , oil , oil
leakage, damage or deformation. leakage, damage or deformation.
• •
A t t a c h m e n t – C h e c k f o r p r o p e r A t t a c h m e n t – C h e c k f o r p r o p e r
installation installation
https://www.forkliftpdfmanuals.com/