UniCarriers FRSB14-8 Operation & Maintenance Manual Download

Page: 61 / 136

INSTRUMENTS AND CONTROLS

2-17

FOOT SWITCH [3]

WARNING

Keep the foot switch depressed with your left

foot during operation. The foot switch is a

safety device that helps keep your left leg in

the operator’s compartment. Operation of the

truck in confined spaces with your leg outside

the operator’s compartment might cause it to be

crushed between the truck and a building wall or

post, resulting in a broken leg.

If the foot switch is released during operation, the

brake is applied and the traveling circuit shuts off

automatically.

BATTERY LOCK RELEASE PEDAL [1]

This pedal is used to remove and return the battery

pack.

Step on the pedal and hold it down while pressing the

reach lever to advance the mast. Then remove or return

the battery pack.

https://www.forkliftpdfmanuals.com/

Summary of Contents for FRSB14-8









































































































































Search results

Summary of Contents for FRSB14-8

Reviews:

Related manuals for FRSB14-8

Brands by name

Popular brands

UniCarriers FRSB14-8, Operation & Maintenance Manual

Search results

Summary of Contents for FRSB14-8

Reviews:

Related manuals for FRSB14-8

Brands by name

Popular brands