UniCarriers FRSB14-8, Operation & Maintenance Manual

Page: 54 / 136

INSTRUMENTS AND CONTROLS INSTRUMENTS AND CONTROLS
2-10 2-10
POWER CONSUMPTION SCREEN POWER CONSUMPTION SCREEN
On the Main screen, press the “Mode” button [4] at the On the Main screen, press the “Mode” button [4] at the
center of the keypad to display the power consumption center of the keypad to display the power consumption
screen. screen.
• •
The power The power consump consump tion [2] tion [2] represe represe nts the nts the power power
consumption per hour. consumption per hour.
• •
The remaining battery The remaining battery time [3] represents time [3] represents the length the length
of time the truck can operate in the future without of time the truck can operate in the future without
recharging, estimated by calculating from the average recharging, estimated by calculating from the average
operating rate of the operating rate of the truck so far. truck so far.
• •
The readings of The readings of the power consumption [2] and the power consumption [2] and
remaining battery time [3] are updated every 6 remaining battery time [3] are updated every 6
minutes. minutes.
NOTE NOTE
• •
The power consumption The power consumption and remaining battery and remaining battery
time should be used as a rough guide, because time should be used as a rough guide, because
they are roughly calculated from the reading of the they are roughly calculated from the reading of the
battery discharge battery discharge indicator. indicator.
• •
The battery capacity used for the basis of The battery capacity used for the basis of
calculation is factory set. calculation is factory set.
If If the the batt batt ery ery is is chan chan ged ged to to a a batt batt ery ery whose whose
capacity is different from the factory setting, consult capacity is different from the factory setting, consult
your local UniCarriers your local UniCarriers dealer. dealer.
HOUR METER SCREEN HOUR METER SCREEN
Every time the “Mode” button [12] is pressed, the screen Every time the “Mode” button [12] is pressed, the screen
changes as follows: changes as follows:
→ →
Main screen Main screen
→ →
Power consumption screen Power consumption screen
→ →
Hour meter Hour meter
screen screen
• •
The current hour m The current hour m eter data can be r eter data can be r eset by pressing eset by pressing
the + button [13] and holding it down for a while. The the + button [13] and holding it down for a while. The
current data will be shifted to the left row in the history current data will be shifted to the left row in the history
table. table.
• •
Three rounds of past Three rounds of past data can be stored i data can be stored i n the history n the history
table. table.
• •
Actual operating tim Actual operating tim e: the total e: the total conduction time conduction time of the of the
drive motor or pump motor drive motor or pump motor
• •
Operating rate: Operating rate: Actual Actual operating time/the operating time/the total total time time
the key switch is kept in the key switch is kept in the “ON” position the “ON” position
1. 1. Power Power consumption consumption
indicating area indicating area
2. 2. Power Power consumption consumption
3. 3. Remaining Remaining battery battery
time time
4. 4. “Mode” “Mode” button button
5. 5. + + button button
1. 1. Key Key switch switch “ON” “ON”
time time
2. 2. Drive Drive motor motor
conduction time conduction time
3. 3. Pump Pump motor motor
conduction time conduction time
4. 4. Distance Distance traveled traveled
5. 5. Actual Actual operating operating
time time
6. 6. Operating Operating rate rate
7. 7. T T otal otal time time
8. 8. Date Date on on which which
recording of data recording of data
was started was started
9. 9. Past Past data data
10. 10. Current Current data data
11. 11. 3 rounds 3 rounds of past of past
data data
12. 12. “Mode” “Mode” button button
13. 13. + + button button
https://www.forkliftpdfmanuals.com/