UNI-T UTG9000T Series, User Manual, Page: 24 / 162

UTG9000T Series Function Abitrary Waveform Generator
24
beyond that, the frequency of other component are integer multiples of the carrier frequency are
called harmonic wave. Harmonic whose rated frequency is an odd multiple of the carrier wave
frequency is called odd harmonic;
harmonic whose rated frequency is an even multiple of the
carrier frequency are called even harmonic.
The default frequency is 1kHz, amplitude 100mVpp, DC offset 0mv, phase 0°,harmonic wave type
as odd harmonic, the total number of harmonic wave 2 times, the amplitude of harmonic wave
100m, the phase of harmonic wave 0°. The step to set frequency 1MHz, amplitude 5Vpp, DC
offset 0mV, phase 0°, harmonic wave typs as All, harmonic wave 2 times, the amplitude of
harmonic 4Vpp, the phase of harmonic 0°:
1) Tap Continue tab to select Harmonic.
2) Tap Frequency tab, pop-out the virtual numeric keyboard to enter
1MHz.
3) Tap Amplitude tab, pop-out the virtual numeric keyboard to enter
5Vpp.
4) Tap Total numbe tab, pop-out the virtual numeric keyboard to enter 2.
5) Tap Type tab to select All.
6) Tap Amplitue of harmonic wave tab, pop-out the virtual numeric keyboard to enter
4Vpp.
Figure 2-12 Ramp Wave Settings
2.3.10 PRBS Wave Settings
The step to set the PRBS wave to bit rate 50kbps, amplitude 4Vpp, code element PN7, and edge time
20ns:
1
）
Tap Continue tab to select PRBS.
2
）
Tap Bitrate tab, pop-out the virtual numeric keyboard to enter 50kbps.
3
）
Tap Amplitude tab, pop-out the virtual numeric keyboard to enter 4Vpp.
4
）
Tap PN code tab, pop-out the virtual numeric keyboard to enter PN7.
The default edge time is 20ns.