User’s Manual UT5583 Insulation Resistance Tester
Instruments.uni-trend.com
14
/
47
4.3.2
Connecting UNT with Shielded Terminal
UNT (unit under test) with shielded terminal, such as standard high resistance, device and equipment
with shielded enclosure, and etc. Please measure it as the following method.
Figure
4-3-2
Measure UNT with Shielded Terminal
Note: If UNT has
shielded enclosure, the shielded enclosure cannot
connect to positive and negative.
4.3.3
Connecting UNT with Polarity
UNT (unit under test) with polarity, such as the capacitor with positve and negative polarity.
It must be meaured as the following method and should distinguish the positvie and negative.
Figure
4-3-3
Measure UNT with Positive and Negative
4.3.4
Connecting UNT with Nonolarity and Unshielded Terminal
The device and material without polarity and shielded terminal, such as electric wire and cable.
Please measure it as the following method. No special test requirements.
Figure 4-3-4 Measure UNT with Nonolarity and Unshielded Terminal
