User’s Manual UT5583 Insulation Resistance Tester
Instruments.uni-trend.com
31
/
47
No.
Function
A--DATA TIME
Record time
B—R (OHM)
Insulation resistance value in scientific notation (unit is
Ω).
C—I (A)
Leakage current in scientific notation (unit is A).
D—VOLT (V)
Monitoring voltage value
E— (COMP)
Comparative Results
OFF: no comparison
PASS: qualified
UFAIL: over the upper limit
LFAIL: over the lower limit
OPEN: open circuit (poor contact)
12. Handler Interface
The instrument provides a full-featured handler interface that includes the signals of sorting output
PASS/FAIL, EOM (test completion signal) and TRIG (external trigger initiation) input. Depending on the
comparator mode (single and period), the instrument provides two sets of handler interface test
solutions. Through this interface, the instrument can be easily connected to the user's system control
components to complete the automatic control functions.
Comparator modes (single and period), for the difference between the two modes, see [8
Comparator Settings] section for details.
Normal use of Handler interface, [Comparator] select [Open], [Trigger Mode] select [External].
12.1 Wiring Terminal
Figure 12-1 Wiring Terminal
Note: The signal name prefixed with “I” denotes the input signal, and the signal name prefixed with “o”
denotes the output signal.
