User’s Manual UT5583 Insulation Resistance Tester
Instruments.uni-trend.com
27
/
47
9. System
9.1 <System Configuration> Page
<System Configuration> page can set language, date and time and communication setting.
In the stop state, press [System] key to enter <System Configuration> page.
Figure 9-1 <System Configuration> Page
Table 9-1 Description of <System Configuration> Page
Item
Setting
Default Setting
Description
Language
English, simplified
Chinese
simplified
Chinese
Language setting of instrument
Date and
Time
Current date and
time
Instrument uses 24 hour system, change the date
and time by function keys
Volume
Low, middle, high
Low
Beeper’s volume
Sound Key
ON, OFF
ON
The switch of key sound
Backlight
Brightness
10%, 30%, 50%,
70%, 90%, 100%
100%
Backlight brightness of LCD
Communic
ation Mode
RS232, RS485, LAN RS232
Instrument supports three remote control
interfaces, RS232, RS485 and LAN interface.
Communic
ation
Protocol
SCPI, MODBUS
SCPI
Instrument
supports
two
communication
protocols, SCPI and Modbus (RTU). It is usually
convenient to use SCPI to communicate with
computers.
Communication with PLC and other industrial
control equipment, Modbus protocol is easier to
use.
TFor more details on protocol, refer to “UT5583
Insulation Resistance Tester – Programming
Manual”.
