![background image](http://html1.mh-extra.com/html/umax-technologies/powercolor/powercolor_user-manual_3572161069.webp)
Chapter 4: Color Correction in the CMYK Color Space: Production Mode
4-3
Selecting Fixed Reference Points
The Static Probes section at the bottom of the CMYK Probe can be toggled open
or closed by clicking on the blue triangle. It allows you to select up to three fixed
points in the image which you can use to monitor important tonal ranges as you
correct the image.
To select a point, click on the 1, 2, or 3 button and click on the desired location
in the image. The location is flagged with the number, and the colors and dot
percentage values for that point before and after any changes are displayed in the
Probe.
Note:
New static points can be selected at any
time using the above procedure, but the points
cannot be moved or deleted.
Summary of Contents for PowerColor
