background image

 

A

 

To Safely Use This Equipment 

Thank you for purchasing our product. This pump is designed exclusively for 
vacuum evacuation, and it may malfunction or cause accidents if operated 
inappropriately. Please read the manual thoroughly, and pay specific attention to 
inspection, maintenance and safety guidelines. Read and fully understand the 
description of this manual to prevent serious accidents from occurring. 
The copyright of this user’s manual and safety guides are reserved by Technical 
Division of Ulvac Kiko. No part of this document, in whole or part may be 
reproduced without permission of Ulvac Kiko Inc. 

 

Read this section before using the VPC-051. Always follow the instructions below to 
safely use the device and prevent personal injuries from occurring. 
 
The symbols below have the following meaning. 

 
 
 
 
 
 
 
 
 
 
 
 

 

Danger 

Incorrect handling of the equipment is very likely to 
result in death or serious injury to the operator. 

 

Warning 

Incorrect handling of the equipment may result in 
death or serious injury to the operator. 

 

Caution 

Incorrect handling of the equipment may result in 
light or medium injuries to the operator or damage 
to the equipment. 

 

 
 
 
 
 
 

This indicates action or practice that should be 
made. 

 
 
 

 

 

Always make connection with the earth. 

 
 
 

 

 

This indicates the action or practice that should be 
prohibited. 

 
 
 

 

 

Do not disassemble. 

 

Do not touch. 

 
 
 
 
 
 
 

 

 

Summary of Contents for VPC-051

























Reviews: