UltraGauge Blue, Installation & Operation Manual

Page: 79 / 83

______________________________________________________________________________________
Page 79/83
UltraGauge
Blue
™
User Manual www.ultra-gauge.com
U
U
p
p
d
d
a
a
t
t
e
e
B
B
l
l
u
u
e
e
A
A
d
d
a
a
p
p
t
t
e
e
r
r
The UltraGauge Application provides the ability to update the Blue Adapter.
Update Procedure:
1
1
.
.
Make sure the UltraGauge Application is connected to your Blue Adapter
2 2 . .
Chose Settings

UltraGauge Settings

Update Blue Adapter
This screen displays the current Blue Version as well as the version which will be updated to the Adapter.
3.
As per the screen prompts, Press the Button on the Blue Adapter and then tap “Next”.
The Adapter will then reboot and light the Attention icon solidly. Release the Button. If the Attention icon is not on,
then restart the process (or see the Note below)
4.
Once the Attention icon is on solid, the App will attempt to reconnect. Connection is successful when the Blue
Bluetooth icon on the Adapter lights. If the App should time out while attempting to connect, wait for the Bluetooth
icon to light (this can take as long as a minute), then hit back and re-tap the “Update Blue Adapter” button.
5.
Chose “Next” to start updating Blue. A progress bar reflecting the status of the update will be shown. Make sure to
keep your phone on, within range of the Blue Adapter, and keep the ignition in the RUN position. When complete,
there are two outcomes:
a.
Download Successful
: A message indicating the success of the download is briefly displayed. The Adapter will
then reboot and begin normal operation. Exit back to the main gauge screen.
b.
Download Failed
: You will receive an error indication. Exit back to the main Gauge screen and select the
Bluetooth Connection Icon to determine if there is a connection. If no connection, select the appropriate Bluetooth
Adapter from the list(if more than one) and reconnect. Once connected, start from step 2 above.
Note: Once connected, if the Bluetooth icon and the Attention icon are both on solid, then the adapter is already
ready to download the update. If this is the case, goto step 5.
If the download failed, the adapter may be unable to operate normally. Please follow the Note below.
Note : In some cases after updating the Blue Adapter it MAY be necessary to re-Pair the Blue Adapter with your Mobile Device.
Note : If for some reason the UltraGauge Application cannot connect to the Blue Adapter, you will need to perform the following
steps to perform the update
A. Unplug the Blue Adapter from the vehicle’s OBDII port
B. While carefully holding the button on the Blue Adapter pressed, plug the Adapter back into the vehicle’s OBDII port
a. The Attention icon should be on solid. This indicates that the Blue Adapter is in Update mode. If not, retry
from step A.
C. If the Attention icon is on solid, goto to step 2 of the Update procedure above.