______________________________________________________________________________________
Page 12/83
UltraGauge
Blue
™
User Manual www.ultra-gauge.com
ii.
Press and Hold the BlueTooth Icon. This will bring up the Blue Tooth configuration screen. Switch on the
BlueTooth if not already on.
iii.
The mobile device will scan and discover the UltraGauge Blue Adapter.
The ignition
must
be in the START position
iv.
Enable Pairing at the UltraGauge
B
B
l
l
u
u
e
e
TM
Adapter:
1.
Press and Hold the UltraGauge
B
B
l
l
u
u
e
e
TM
Adapter button
2.
After 3 seconds, The OBDII Icon will begin to blink, continue to hold until the Attention Icon begins
slow blinking, indicating that the adapter is in pairing mode. Release the button.
v.
Initiate Pairing on the Mobile device by tapping “Ultragauge Blue”
Note: Some Mobile Device may request a PIN number when attempting to Pair, if requested specify “6172”
as the PIN.
vi.
Once paired, the mobile device will show “paired” and the Attention icon will no longer be lit. If the
Attention LED is still blinking, pairing was not fully successful. Tap the setup icon that appears to the right of
“UltraGauge Blue” on the mobile device. Then click “Unpair”. Repeat the above starting at step v.
