UltraGauge Screens
Custom Gauge List
______________________________________________________________________________________
Page 56/83
UltraGauge
Blue
™
User Manual www.ultra-gauge.com
1
st
Gauge:
For each gauge created, UltraGauge will allow you to apply math for the creation of up to 2 separate Gauges. For
example, this would allow the creation of a Metric and an English version of your gauge.
o
Units:
Unit name to be displayed below the actual value on any gauge displayed on the Gauge Page.
o
*:
This value will be multiplied by the Response returned.
o
/:
This value will be divided by the Response returned.
o
+:
This value will be added to the Response returned (after the * and / above).
o
Min:
Specifies the Minimum value returned in the Response.
o
Max:
Specifies the Maximum value returned in the Response.
2
nd
Gauge
o
Units:
Note: If no units are specified for the 2
nd
Gauge, then this gauge will not be created.
o
1
st
*:
The value specified here will be multiplied by the result of the 1
st
Gauge above
o
1
st
/
o
1
st
+
Example:
Below is an example of how to set the Custom Gauge fields when implementing the Standard OBDII RPM sensor. The standard
defines RPM as:
Service/PID (hex) Bytes Description
Min Max
Units Formula
010C
2
Engine RPM 0
16,383.75 Rpm
((A*256)+B)/4
This maps to the UltraGauge Custom fields as follows:
Name:
RPM
Descr:
Engine RPM
Command
CAN 29-bit 18 DA 10 F1
02 01 0C
CAN 11-Bit
07 E0
02 01 0C
9141
68 6A F1 01 0C
KWP
87 F1
10 01 0C
Expected Response
CAN 29-bit 18 DA 10 F1
41 0C
CAN 11-Bit
07 E8
41 0C
9141
41 0C
KWP
87 10
F1 41 0C
Response bit offset:
0
Number of response bits
: 16
Expected response is signed
: No
Group:
Custom Gauges
1
st
Gauge 2
nd
Gauge
Units
rpm
<empty>
*
1
1
/
4
1
+
0
0
Min
0
N/A
Max
16383.75
N/A
