UltraGauge Screens
Settings
______________________________________________________________________________________
Page 41/83
UltraGauge
Blue
™
User Manual www.ultra-gauge.com
6.
Place the ignition in the RUN position
7.
Re-attach the Adapter (
Note: if the Attention LED remains lit, this indicates the Adapter did not detect ignition
on. If this happens, tap the button on the Adapter and it will then power-up).
8.
Start the UltraGauge Application and connect to the Adapter. The Application will then discover the available
gauges.
9.
Once the Application has found the available gauges, start the vehicle and ensure the issue has been resolved
Once forced, the Adapter will likely not function if moved to a difference vehicle. This can be resolved one of three
ways:
1.
Prior to moving the Adapter to a different vehicle reset to Automatic Protocol by navigating to::
Settings
UltraGauge Settings->Force OBDII Protocol
Then select
Automatic
and exit the screen.
2.
If the protocol used on the second vehicle is known, use the Force Protocol menu to force the protocol to that of
the second vehicle.
Once attached to the second vehicle perform the operation mentioned in option 1 above.
Navigate
Update Blue Adapter
Settings
UltraGauge Settings
Update Blue Adapter
Provides ability to update the Adapter. When connected to the Adapter, can wholly update the Adapter to the latest
version. This allows for defect corrections and the latest enhancements to be applied.
Navigate
Restore factory default settings
Settings
UltraGauge Settings
Restore factory default settings
Restores all internal and configurable settings back to the factory defaults. Restoring all defaults should be used with
care as it restores all configuration such as Calibration, Gauge selection, Alarms settings, display settings, as well as all
accumulated MPG, MPH, Time, and Distance. This function is a global restore. There are generally individual restores
or resets for various functions which should always be used first to correct suspected issues. This can be considered the
global “Reset” of UltraGauge.
For Apple, the user should re-install the application for a Factory Reset to take place for the UltraGauge Application.
Navigate
Vehicle Settings
Settings
Vehicle Settings
Navigate
Force MPG Sensor
Settings
Vehicle Settings
Force MPG Sensor
Forces UltraGauge to use the MAF or MAP sensor to calculate fuel usage.
Force MPG Sensor Setting
Description
Auto
UltraGauge automatically determines the best sensor to use
MAP
UltraGauge is forced to use the MAP sensor
MAF
UltraGauge is forced to use the MAF sensor
Normally
Auto
is the correct and desirable setting and changes to this setting are not recommended. Certain vehicles
misreport the presence of a sensor. When this happens, UltraGauge is not able to calculate the fuel usage and various
mileage gauges may display “Err” or nonsensical values. All other gauges will display correctly. This setting is used to
override the reported sensor and forces UltraGauge to use the selected sensor. This problem is common on F250 and
F350 Ford diesel trucks. Typically the presence of MAF is reported when it is not present. In this situation, setting
Force MPG Sensor to “
MAP
” will resolve the issue.
