18
GB/IE/NI/CY/MT
Hold the RFID card
44
over the symbol
6a
for a moment.
The following image will be displayed on the digital charging display
3
:
Access authorisation with RFID card
44
is now permanently activated.
Exit basic settings:
Put the basic settings cover
35
in place.
Screw the basic settings cover
35
back on using the 4 screws for the basic settings cover
36
on the
side of the EV charger
1
.
Using the cover detect switch
38
, the device detects that the basic settings cover
35
is in position and
exits the basic settings display.
z
Using the device
PLEASE NOTE:
If the charge current is too high, the connection cable may be damaged and this
could result in a fire.
Please note the information for your state and abide by the max.
permissible charge current.
If required, the emergency stop switch
5
can be pressed at any time. “STOP” will be displayed in red
on the digital charging display. You can go back to the original state by rotating the emergency stop
switch
5
clockwise a little.
Start the charging process:
Completely unwind the electric car connection cable
7
.
The digital charging display
3
indicates that a car is not yet connected:
The LED strip
4
lights up white and indicates that charging is not taking place.
Remove the protective cap
9
from the plug
8
on the car side.
Plug the plug
8
into the car.
The digital charging display
3
indicates that a car is connected:
