Exo x6a Operations Manual
revision 1
1st September 2013
o
To remove the items in the list you do not want – I.E. to return to the values
initially set for logging type “disable” followed by theitem name. Or you can go
back to the Software – Advanced Parameters and use the Log
bitmask(LOG_BITMASK) parameter and select one of the configurations for
your vehicle.
1.4.3.Downloading Logs with the Mission Planner
Go to the Mission Planner‟s Terminal Screen
Click “Connect APM” or “Connect PX4″
When the prompt appears click “Log Download”
When the “Log” window appears click the checkbox of the log you wish to download
(normally the highest number)
Select your vehicle type (APM:Copter, APM_Plane, APM:Rover). This ensures you get
the correct scaling for a few parameters as the data is downloaded.
Push “Download These Log”
For very large logs it can take several minutes to download but you should see the amount of
data transferred so far in light grey just below the “Clear Logs” button. When the file is
completely downloaded “Done” should appear in the area below the Clear Logs button..
