Ultimaker Ultimaker S5 Pro Bundle, Installation And User Manual

Page: 6 / 52

Ultimaker S5 Pro Bundle user manual 5
1.1 Safety messages
This guide contains warnings and safety notices.
The information provided below is applicable to the Ultimaker S5, Material Station, and Air Manager
(“Ultimaker S5 Pro Bundle”).
Provides additional information that is helpful to do a task or to avoid problems.
Warns of a situation that may cause material damage or injuries if the safety instructions are not followed.
1.2 General safety information
The following safety information is applicable:
• The Ultimaker S5 generates high temperatures and has hot moving parts that can cause injury. Never reach
inside of the Ultimaker S5 while it is in operation. Always control the printer with the touchscreen at the front or
the power switch at the back. Allow the Ultimaker S5 to cool down for 5 minutes before reaching inside
• Do not change or adjust any parts of the Ultimaker products unless the change or adjustment is
authorized by the manufacturer
• Do not store items inside Ultimaker products, except for compatible filament spools within the Material Station
• Ultimaker products are not intended for use by persons with reduced physical and/or mental capabilities, or
lack of experience and knowledge, unless they are supervised or have been given instructions concerning the
use of the appliance by a person responsible for their safety
• Children should be under constant supervision when using Ultimaker products
• Do not touch the fan of the Air Manager when changing the filter
1 .3 Hazards
Electromagnetic compatibility
This equipment has been tested and found to be compliant with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy, and if not installed and used in accordance with the instruction manual may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his or her own expense.
An electrostatic discharge in some metallic parts of the device may cause the interruption of NFC communications,
affecting the initial detection of the material spool. In these cases, a device restart should solve the problem.