MASC
QUICK START GUIDE
Page
11
of
19
3.3.3
LEMO Connectors
All limit switch connectors are made with a 6 pin right angled LEMO connector.
1. Push the connector into the socket until it clicks into place. Ensure the alignment key is
aligned with the alignment slots
3.3.4
Encoder Connections
Motors with M12 connectors and integral encoder (specified with order) have a built in 500 line
incremental rotary encoder. The connector is sited next to the motor connector. To connect the
cable, see section 3.3.1. Encoders have 8 pin connectors.
Motors with UTO connectors and integral encoder (specified with order) have a built in 500 line
incremental rotary encoder wired to a 9 way D socket.
1.
Push the plug into the connector socket
2.
Screw in the locking screws using a suitable, flat bladed screwdriver. Turn screws clockwise
until finger tight
`
Plug alignment key
and slot
Encoder Connector
Motor Connector
Locking screws
