MASC
QUICK START GUIDE
Page
10
of
19
3.3.2
UTO Connectors
Older stepper motorised products use UTO style connectors on the motors. There is an adaptor cable
supplied with every motor cable to convert from the standard M12 connector to a UTO (part number
WD-C-006). To attach M12 cables together, see section 3.2.3
1. Push connector into socket. Note: socket will not engage unless key features are aligned
correctly on both the plug and locking ring
2. Twist the knurled locking ring clockwise until it clicks. (approximately 30°)
Knurled Nut
Knurled
Locking Ring
Plug alignment key
and slot
Locking ring
locating key
