MASC
QUICK START GUIDE
Page
18
of
19
4.1.3 Limits and Datum Mode
1.
The MASC-JB has built in home and limit seek functions pre-programmed into it. To access
these functions, press the mode select button once.
2.
The following screen will appear. Press the function you wish to perform by pressing on the
desired label.
Note: the red dot indicates which function is selected.
3.
Press the SEEK button to perform the operation. The speed at which these functions is
performed is defined by the speed selection slider in the jog mode screen. If you wish to
stop the move before it is complete, press the mode select button.
4.
If desired, once the move is complete, the position can be set to 0 by pressing the SET ZERO
button. Alternatively the Pos. display shows the current position and updates every few
seconds. These numbers may be written down for later use in automated programs.
Mode Select
Button
Press CCW label to
select CCW seek
function
SEEK Button
In this example, the
red dot indicates that
CW seek is selected
SET ZERO
Button
Press HOME label
to select home
seek function
Mode Select
Button
Position
display
